HEAVY
DUTY
14
t
18
~
-
J
~
......
""'
~~o
if
This unit is equipped with an iPod ready function that will allow you to control your I Pod (if
compatible) using the control panel buttons. The
following iPod versions are supported:
iPod Nano 5G, 6G,
7G
iPod Classic
iPod Touch 3G, 4G, 5G
!Phone 4, 4S,
5,
5C, 5S
NOTE:
Earlier
model
iPod's
are
not
supported
because
they
do
not
implement
the
required
control
protocol.
Also,
the
iPod
shuffle
is
not
supported
because
it
does
not
utilize
the
30-pin
Apple
iPod
Connector. These
unsupported
iPod
models
may
be
connected
to
the
radio
using
one
of
the
Auxiliary
Inputs
.
Accessing
iPod
Mode
Connect a supported I Pod
or
I Phone to the front
panel
USB (or Rear USB) connector (17). The iPod
icon illuminates in the bottom left corner of the LCD
whenever an
I Pod
or
!Phone is attached to the USB
connector. Music playback begins automatically. To
enter
iPod mode from any other source, press the
MODE button (4) until "iPod" appears on the display.
If the user connects an I Pod containing
no
songs, the
radio
will display a message stating "No Songs" In
iPod
mode.
D
h_
-J
!Pod touch
~
~(o).J
iPod
dassk
~
'@I
tJ
IPod
nano
i
Phon~
4
15
JHD36A
Turning
the
iPod
On/
Off
The I Pod power turns on automatically when it is connected to the front panel USB port, as long
as the
vehicle ignition is turned on.
You
can turn the iPod off by disconnecting
It
or
by turning the
Ignition off. When the ignition is off, the iPod will pause and then enter sleep mode after 2
minutes. While the
I Pod is connected, the power cannot be turned on
or
off from the I Pod itself .
NOTE:
The
iPod
will
continuously
recharge
while
in
iPod
playback
mode.
Controlling
Playback
Pausing
Playback
During playback, press the
MUTE/>11
button (24)
to
pause the iPod player. "Pause" will appear
on the LCD.
Press
MUTE/>11
again to resume playback.
Repeat
Play
During playback, press the 1/RPT button (8) to repeat the current song. "RPT" will appear on the
LCD.
Press 1/RPT again to stop repeat playback.
Random
Play
During playback, press the 3/RDM button (5) to play all songs
in
the current category in random
order. Random play
will begin once the current song has finished playing. "ROM" will appear on
the LCD.
Press 3/RDM again to stop random playback.
Selecting
Tracks
During playback, press the
TUNE/SEEKI«
or
»I
buttons (18, 19) to play the previous
or
next
track in the current category.
Press the TUNE/SEEK
I«
button once to play the song from the
start position
or
press TUNE/SEEK
I«
twice to play the previous track. Pressi
ng
the
TUNE/SEEK
I<< button during
the first 2 seconds of a track
will play the previous
track.
After 2 seconds, this action returns to the beginning of the current track.
Press
and
hold the
TUNE/SEEKI«
or
>>I button to fast reverse/forward the song.
NOTE:
If
you
press
and
hold
the
TUNE/SEEK]<<
or
»I
button
to
change
the
current
song
to
the
previous/next
song
,
you
will
exit
fast
reverse/forward
mode
.
Alternate
Display
Mode
Press
the
DISP/SCROLL button (12) to change the display information between single and
double line text display.
Playlist
Search
Press the PTY/CAT/MENU button (2) to access Playlist selection mode. While in Category
mode, press the
TUNE/SEEKI«
or
»I
buttons to choose file search by Playlist, Artist, Album,
Genre, Song, Audiobook or
Podcast. Press the INFO/ENTER button (16) to select the search
mode. Use the
TUNE/SEEKI<<
or
»I
buttons to search the available files on the iPod.
Press
the INFO/ENTER button to play the selected song or file.
To Next Page
Loading...
