HEAVY
DUTY
BASIC
OPERATION
Power
On/
Off/
Radio
Press the rotary encoder POWER/AUDIO button (1) to turn the unit on or press
and
hold to turn
off. The unit
will resume at the last mode selected (Tuner, Auxiliary, etc.).
POWER
Volume
Control
\
+
To
increase the volume, turn the rotary encoder (1) to the right.
To
decrease the volume, turn the
rotary encoder to the
left. While adjusting the volume, the LCD displays a bar graph and
numerical representation of the level.
I,)OLIJME:
25
1
·:·
. t::"
......
-
•••
t·1
.:...·-'-•H
The maximum volume setting
is
40.
5
JHD36A
Mute
Press the MUTE button (24) to mute the audio output. Press MUTE again to restore the audio
output to the previous
level.
Mode
Press the MODE button (4) to select a different mode of operation, as indicated on the display
panel. Available
modes include the following: Tuner (AMI FM) > SXM (SiriusXM) > iPodl USB >
CD
>
Auxiliary > BT Audio. Tuner is the default source when a prior source
is
no longer
available.
NOTE:
CD,
iPod, USB
or
SiriusXM (SXM)
mode
will
be
skipped
if
the device
is
not
installed.
NOTE:
SiriusXM
(SXM)
mode
will
be
skipped
when the Region
menu
option
is
set
to
"EURO".
Reset
The reset button should be activated for the following reasons:
• Initial installation of the unit when all wiring is completed
Function buttons do not operate
Error
symbol on the display
Use a ball point pen or thin metal object to press the RESET button (23). This may be necessary
should the unit display an error code.
Audio
Menu
Press the POWER/AUDIO button (1) to access the audio menu.
You
can navigate through the
audio menu items by pressing the
POWER/AUDIO button repeatedly. Once the desired menu
item appears on the
display, adjust that option by turning the rotary encoder (1) within 5 seconds.
The unit
will automatically exit the audio menu after five seconds of inactivity. The following
menu items can be adjusted.
Bass
Level
Use the rotary encoder (1) to adjust the Bass level range from "-6" to "+6".
Treble
Level
Use the rotary encoder (1) to adjust the Treble level range from "-6" to "+6".
Balance
Adjusting Balance controls the relative level between the left and right speakers in each pair.
Use the rotary encoder (1) to adjust the
Balance between the left and right speakers from "Left
12"
to "Right 12".
Fader
Adjusting Fade controls the relative level between the front and rear speaker pairs. Use the
To Next Page
Loading...
