JETSURF ELECTRIC - Battery Pack Removal

27
6. BATTERY PACK
• Place the battery pack in the Jetsurf Electric
so that the battery plug
B
and battery
socket
C
are against each other (see the
gure JE_0605).
• Press the battery pack downwards.
• Secure the battery pack using all 4 (four)
locks
A
.
Caution (Risk of Injury)
Never insert the engine shut-o key in the engine shut-o switch if all the locks on the
battery pack are not secured.
6.4. BATTERY PACK REMOVAL
Note (Material damage)
Before removing the Battery Pack after the ride, do not forget to let all the remaining
water out of the cooling system (
p. 52). The presence of the water in the cooling
system can result in permanent damage to the battery, connector and regulator.
B
C
A
JE_0605
JE_0606
JE_0607