40
8. BEFORE THE RIDE
Info
The side ns have a at surface on the inside and a convex foil on the outside. The
convex or curved side of the n always points outwards.
• Then, lower the rear tab into the rear slot
of the plug until the mechanism engages
the tab.
• Check the tight t, the n should not move.
• Repeat this procedure for the second side n.
Info
This mechanism will hold the n in place until removal.
Warning (Risk of Accidents)
It is strongly recommended to use all ns under all circumstances. This ensures
maximum control of motorized surf.
8.3.2. THE SIDE FIN REMOVAL
• To remove the n, grasp the n and pull
upwards.
JE_0810
JE_0811
To Next Page
Loading...
