JETSURF ELECTRIC - Starting in Deep Water or after Falling down

49
9. RIDING INSTRUCTIONS
Info
The engine shut o key can be inserted by the rider into the engine shut o switch
assuming that the ECU is activated. (
p. 45)
• After activation of JetSurf Electric and its subsequent acceleration, the rider must jump
into the JetSurf with his/her full weight.
Info
For comfortable ride and correct functionality of the equipment it is necessary to hold
the throttle for the whole ride. It is not necessary to keep the full speed but when the
speed is not sucient, the motorized surf becomes unstable and more dicult to
control.
9.5. STARTING IN DEEP WATER OR AFTER FALLING DOWN
Starting in deep water happens similar to start from the bank.
• If after falling down the rider manages to insert the engine shut-o key in the engine shut-
o switch within 5 (ve) minutes, the JetSurf Electric activates.
Note
The rider does not get on the board until the JetSurf Electric is activated.
• After the JetSurf Electric activates, it is
necessary to use the engine power and pull
yourself back onto the JetSurf Electric.
JE_0907