36
8. BEFORE THE RIDE
8 BEFORE THE RIDE
Warning (Risk of Accidents)
• Before your rst ride without being supervised by an Authorized JETSURF Dealer
or a coach of JetSurf, please make sure that you have read and understood the
manual supplied together with the motorized board.
• Familiarize yourself with the laws valid for the water bodies where you intend to use
your motorized surf .
8.1 A BRIEF LIST OF TASKS TO BE DONE BEFORE THE RIDE
LIST OF TASKS BEFORE THE RIDE
1. Charge the battery to its 100% capacity (at least 8 (eight) hours
before riding.
( p. 30)
2. Fasten all ns.
3. Adjust the straps.
4. Check for water presence in the motor compartment ( p. 43)
5. Check of the balancing valve. ( p. 43)
6. Check for water presence in the ventilation compartment. ( p. 43)
7. Jet Pump check. ( p. 44)
8.2. STAND
Info
Every JetSurf Electric is supplied with a light stand. Use of the JetSurf stand is strongly
recommended to keep the motorized surf above the ground, it is intended as an aid
for preparation, maintenance and cleaning of the motorized motorized board..
Make sure that the stand is situated on the solid surface and that the motorized board rests
on the stand correctly.
8.2.1. ASSEMBLING THE STAND
A
4 (four) stand rods
B
4 (four) allen screws
C
stand support
JE_0801
A
B
C
To Next Page
Loading...
