18
T7 T8
T9
T11 T12
T10
T13 T14
T15 T16
T17 T18
BALANCING
T7 Change to menu RIM DATA INPUT
T8 Toggle switch, two functions; reading only as long
as the key is pressed (quick reading):
Pressed on top:
Precision reading of unbalance, no
suppression of minor unbalance readings.
Pressed on bottom:
Reading of amount and location of
unbalance for conventional balancing run
with balance clips - comes up.
T9 Select static unbalance
T10 Select dynamic unbalance
T11 Select number of spokes
T12 Wheel with 6 spokes selected
T13 Select behind-the-spokes placement mode
T14 Behind-the-spokes placement mode selected
RIM DATA INPUT
T15 Change to the screen WEIGHT PLACEMENT
T16 Change to the screen RIM TYPE
T17 Hold key down and enter the distance rim/machine
by rotating the wheel
T18 Hold key down and enter the rim width by rotating
the wheel
To Next Page
Loading...
