Johnson Controls HIDH018B21S - Exception Setting of Run;Stop Operation; External Input;Output Setting

CONTROL SYSTEM
6-108
TC-15001-rev.3
6.9.10 Test Run Procedures
The procedures for the test run are shown below.
Those procedures displayed within a dual border “
” are required items.
Power ON
Start
Adjusting Date/Time
Group Register
Exception Setting of
Run/Stop Operation
External Input/Output Setting
Button Setting
Contact Information Register
Test Run Finish
Language Setting
Optional Function Setting
Temperature Unit Setting
Daylight Saving Time Setting
Group Name Register
Schedule Setting
Wired Controller Setting
Temperature Range