CONTROL SYSTEM
6-128
TC-15001-rev.3
6.9.11.4 Optional Function Setting
6.9.11.4.1 Air Conditioner/Remote Control Setting
1. Select “Optional Function Setting” on
the “Service Menu” screen.
2. Select “Aircon remote setting” on the
Menu screen.
NOTE:
This function cannot be selected
while air conditioners are operating.
3. Select the target groups or block for
“Optional Function Setting”. Touch “All
Groups”, “Block”, or “Group”.
Ɣ Select “All Groups” for optional
function settings when the following
item settings are changed:
Ɣ Operation mode
Ɣ Display of Accumulated Operating
Time
4. Select “Enable” or “Disable” for the
each function.
Ɣ The button color of any selected
function changes to yellow with an
orange outline.
Proceeding to the next step provides
the following options:
Ɣ Set the optional function
of other group; step (4).
Ɣ Exit the optional function
setting; step (5).
5. Touch “Back” to return to the “Optional
Function Setting” screen. Repeat
steps (2) and (3) to set an “Optional
Function Setting”.
6. Touch “Done” to return to “Optional
Function Setting” Menu screen.
1
3
4
6
5
2
Continue on to Next Page
To Next Page
Loading...
Need help?
General
