CONTROL SYSTEM
6-146
TC-15001-rev.3
1. Select “Memo” on the “Service Menu”
screen.
2. The Memo is displayed.
3. Select the target to register.
4. The “Memo Input: screen opens.
5. Select different types of characters
from the tabs (5) along the bottom
of the screen: “Upper Case”, “Lower
Case”, “Symbol 1”, and “Symbol 2”.
6. Select a registered character from
the keyboard.
7. Follow the procedures in steps (5)
and (6) above and insert characters.
Touch “Delete” to erase any undesired
character to the left of the cursor.
NOTE:
The maximum allowable number of
characters is 50.
8. Touch “Close” when the character
input is completed. Return to the
“Memo Display” screen.
6.9.11.10 Register/Edit Memo
6.9.11.10.1 Register Memo
1
8
3
5
6
Continue on to Next Page