Johnson Controls SAB 355 - Signs and Warnings; Main Users

Engineering manual - SAB 355 Screw compressor unit (including ATEX)
14/156
004100 en 2020.10
Signs and warnings
2. Signs and warnings
This chapter describes:
• how to identify equipment from Johnson Controls Denmark
• all warning signs used on equipment delivered by Johnson Controls Denmark
• how information important to safety of personnel and equipment is presented in instruc-
tions belonging to equipment delivered by Johnson Controls Denmark
2.1 Main users
Information concerning Signs and warnings is intended for all users.
The following describes the importance of the individual signs attached to the Johnson Controls
Denmark products.
Before a compressor/unit is put into operation, it must be fitted with the warning signs belonging
to the type of compressor/unit in accordance with the rules and regulations in force.