Engineering manual - SAB 355 Screw compressor unit (including ATEX)
004100 en 2020.10
141/156
Transport instructions
14.2 Transport data
Weight and dimensions
When dispatched, the unit is placed on a wooden frame and covered by plastic film. The wooden
frame is adjusted to the size of the unit.
See also complete dimensioned sketches of the individual compressor types and units.
For weight and dimension, see Table 11: Unit dimension data.
Compressor
type
Block
weight
kg/lb
Centre
height
mm
SAB 355
4600/8245 485.7
Table 40: Block weight
Type
m
3
SAB 355 OHU 7650 58
SAB 355 OHU 6042 50
Table 41: Shipping volume
14.3 Personnel requirements
Personnel who will be handling the unit during loading, transport and unloading must have taken
the necessary courses in crane operation.
14.4 Handling of compressor and unit
The compressor is equipped with a threaded hole for mounting of the lifting eye. For compressor
weight, see Table 14: Compressor weight (without coupling).
To Next Page
Loading...
