Engineering manual - SAB 355 Screw compressor unit (including ATEX)
142/156
004100 en 2020.10
Transport instructions
Fig. 85: Lifting rings, SAB 355
Warning!
Only the compressor block alone must be lifted in the lifting eye. The same applies to the motor.
The unit is lifted by using the lifting devices delivered with the unit, see Fig. 88.
Fig. 86: Lifting device must be completely assembled
before lifting
Fig. 87: Max. 6.5 t
Max. weight per lifting device: 6.5 t.
The lifting devices are constructed for the crane.
To Next Page
Loading...
