Johnson Controls SAB 355 - Page 36

Engineering manual - SAB 355 Screw compressor unit (including ATEX)
36/156
004100 en 2020.10
Technical description
The drawing below illustrates and explains the compressor name:
Fig. 13: Model and serial number explanation
The SAB 355 S, L, E and X screw compressor units are equipped with SGC compressors, types
SGCB 355 and SGCH 355.
Chapter 6. Technical data includes a list of tables of the screw compressors indicating weight, di-
mensions, etc.
The serial number of the compressor is stamped into the compressor block.
Always state the compressor serial number when contacting Johnson Controls Denmark about
the compressor or unit.
L
Rotor diameter
Compressor
Serial number
SGCB
355
Rotor
Short - S
Long - L
Extended - E
1001A