JOYTECH SL800DC - Safety Instruction

1
Dear users,
Thank you for choosing this product. Please read this manual carefully before installation and use.
Please do not forget to include this manual if you send the product to a third party.
1. Safety Instruction
Please read this manual carefully before installation, in which involves with important information about
installation、using、maintenance and safety.
Any undefined operations under this manual is not allowed, incorrect using may damage the product
even causing the injuries or property losses.
To consider the possible danger during the installation or using process of sliding gate opener, installation
must strictly comply with the construction standard and electrical operating procedure, especially the
following:
 Before installation, please make sure that the power voltage being used matches with the supply
voltage of this product. Please check if the leakage protection switch is installed and the grounding
system is correct.
 Please check if additional equipments or materials are required to meet the specific requirements.
 The disposal of packaging material must comply with the local regulation.
 Please do not change any parts except for those defined under this manual. Any undefined changes
may cause the malfunction. Any damages to the product arising therefrom shall be beyond the
liability of the company.
 Please do not leak water or any liquid into the controller or any other open devices. Please
disconnect the power immediately if any mentioned cases happened.
 Please keep this product away from heat and open fire. Or it may damage the components; cause
the failure or other hazards.

Please make sure there is no vehicles、passengers or objects passing through while the sliding gate
is moving.
 Anti-clip equipment like infrared protection switch must be installed to avoid injuries to person and
property losses. The company shall not be liable for any damage or accident arising therefrom.

The installation、using and maintenance of this product must be carried out by professionals.
 Children are not allowed be touch the control devices or play with remote controls.