JR Vibe 90 3D - Tools Needed for Assembly; Field Equipment Required

6
Needle-Nose Pliers
Drill and Drill Bits
Allen Wrenches: 1.5, 2.0, 2.5,
3.0 mm
Sandpaper (80–120 Grit)
Adjustable Pliers
Small Hammer
Hobby Knife
Metric Ruler
Scissors
12-Volt Electric Starter
12-Volt Starting Battery
Helicopter Fuel 15% –30%
Pitch Gauge
(JRP960326)
Fuel Pump
Ball Link Pliers
(RVO1005)
Glow Plugs
(HAN3020)
Hex Starting Shaft
(JRP960090)
Phillips Screwdriver
Nut Drivers: 5 mm, 7 mm
4. TOOLS NEEDED TO ASSEMBLE THE JR VIBE 90 3D (not included):
5. FIELD EQUIPMENT REQUIRED (not included):
JR Ball Link Sizing Tool
JRP60219
( Optional )
1.5-Volt Glow Plug Battery OR
Must have long shaft to reach glow plug.
Remote Glow Plug Adaptor