6-2
UPPER SERVO/GYRO TRAY ATTACHMENT
Socket Head Bolt, 3 x 20 mm
Socket Head Bolt, 3 x 10 mm
..............................6 pcs
....................................4 pcs
Use Red Threadlock
Step 1: Attach the 2 48mm Cross
Members to the gyro plate using the
4 3x6mm Flat Head Screws
Step 2: Attach the Carbon Upper
Servo/Gyro Mounts to the gyro
plate cross members using 4
3 x 10 mm Socket head Bolts.
Step 3: Attach the completed assembly to the
main frame using the 6- 3x20mm Socket head
bolts, 4- 6mm Hex Standoffs, and 2- 2.5mm
Round spacers. Note that the 2.5mm Round
Spacers fit between the Carbon plate and the
Aluminum CCPM servo mount as shown.
Spacer, 2.5 mm
Cross Member, 32 mm
...........3 pcs
..........................................2 pcs
Special Cross Member, 48 mm
...2 pcs
Flat Head Bolt, 3 x 6 mm
...................................... 4 pcs
.....................................4 pcs
Hex Standoff, 6 mm
Special Cross Member,
48 mm (2 pcs)
Carbon Upper Servo/Gyro Mounts (2 pcs)
Flat Head Bolt,
3 x 6 mm (4 pcs)
Carbon Gyro Plate
Socket Head Bolt, 3 x 10 mm (4 pcs)
Aluminum CCPM
Servo Mount (1 pc)
Round Spacer, 2.5 mm (4 pcs)
Socket Head Bolt,
3 x 20 mm (6 pcs)
Hex Standoff,
6 mm (2 pcs)
Hex Standoff,
6 mm (2 pcs)
Cross Member
32 mm (3 pcs)
To Next Page
Loading...
