4-2
SWASHPLATE/WASHOUT INSTALLATION
Washout Assembly
(preassembled)
Long Flange
Up
Install on the main rotor shaft so
the longer portion of the washout
base faces downward toward the
swashplate.
WASHOUT ASSEMBLY
Please note the proper upper swashplate ring position as
shown before attaching the washout unit. When attached
properly, the relief areas in the upper swashplate ring will
allow increase clearance for the washout arms.
Use caution when connecting the ball links to the swash-
plate balls to prevent damage. It is also a good idea to size
the ball links with the JR Ball Link Sizing tool prior to
attachment.
Note:
Swashplate
To Next Page
Loading...
