6-1
TAIL BELCRANK ATTACHMENT
Socket Head Bolt, 3 x 18 mm
Socket Head Bolt, 3 x 8 mm
..........1 pc
.............2 pcs
Step 4: Attach the aluminum
mounting bracket to the right
rear frame as shown using 2
3x8 mm Socket Head Bolts.
Flat Head Screw, 2 x 8 mm
..............2 pcs
Nylon Lock Nut, 3 mm
..................1 pc
Steel Joint Ball
...................2 pcs
Use Red Threadlock
Step 1: Insert the 2 flanged bearings
and spacer into the belcrank.
Step 2: Attach 2 Steel Control
Balls to the belcrank as shown
using 2 2x8 mm Flat Head Screws.
Note position/location of balls.
Flanged Bearing
Brass Spacer
Plastic Belcrank
Step 3: Attach the completed
belcrank to the aluminum
mounting bracket as shown.
Flat Head Screw,
2 x 8 mm (2 pcs)
Steel Joint Ball (2 pcs)
Plastic Belcrank
Aluminum Mounting Bracket
Socket Head Bolt,
3 x 8 mm
Red
To Next Page
Loading...
