JR XP810-3 User Manual

www.modelflight.com.au – World’s best source of JR products
XP8103 Manual Addendum
Please refer to the info below for clarification before using these functions.
This infor mation is applicable in all model types (Airplane, Helicopter , Glider).
Manual Page
A
ir
p
lane 28 Helico
p
te
r
66 Glide
r
106
Model Select
(
S
y
stem Set-U
p
Mode
)
The XP8103 transmitter employs a memory function which mem-
orizes data for up to 10 individual aircraft. All settings along
with type selection, function, and different aircraft are used by
one transmitter . For example, Model 1 is airplane and Model 2
is helicopter . T o avoid confusing models, inputting model names
for each aircraft is recommended (see page 29). Press the U
P
and DN keys simultaneously and tur n the power switch ON t
o
access the System Set-Up Mode.
The display below shows the model selection function.
model number
(
1-10
)
model name
(if dot is shown, model
name is blank)
modulation
type
Press UP and DN keys
simultaneously to exit the
S
y
stem Set-U
p
Mode
Press UP and Select keys
simultaneously to access the
S
y
stem Mode info dis
p
la
y
To Model Name function
UP
DN SELECT CH CH CLEAR
Function select
(
select model/co
py)
Model selection
To Info Di s
p
la
y
function
(
1-10
)
T ime
r
Data Transfer:
It is necessar y to press the clear key once after the system
has been retur ned to the normal display to also transfer the
timer data. If the clear key is not pressed after the model
select function, the time setting from the current model will
be changed to the time setting of the
pr evious model .

JR XP810-3 Specifications

General

Brand	JR
Model	XP810-3
Category	Remote Control
Language	English