ve Function
With the XP8
10
3 system, individual throttle cur
ves are selectable
to be either straight (linear) or cur
ved (exponential). T
o
select an
exponential cur
ve, press either of the CH keys until EXP OFF
appears on the throttle curve screen. Next press either the + or -
key to activate the exponential feature (an “on” will replace the
“of
f” on the screen). With the exponential function ON, you will
notice that any “sharp” angles of the throttle cur
ve will become
more “rounded” or “smooth,” creating a more equal throttle
ser
vo movement during the entire throttle cur
ve range.
UP
DN
SELECT
CH CH CLEAR
Press either CH key
until EXP OFF
appears on the
screen
Press the + or - key
to activate (turn on)
the exponential
feature
Press the Clear key
to return the
Exponential
Function to the
OFF
osition
Idle Up
Nor
mally
, flight mode 1 and 2 are used to increase engine RPM
below half stick for forward flight maneuvers (idle up), and at
this time any other trims are not active as the throttle will only
operate/follow the current throttle cur
ve values.
HELI
80
To Next Page
Loading...
