Channel Selection
Before selecting the desired channels to be mixed, you will need
to activate the Programmable Mix #3 Function by pressing
either the + or - keys once. Next, press either the + or - keys until
the first, or master
, channel desired is displayed. T
o
select the
desired slave, or second, channel, press either of the CH keys
once to move the underlined cursor to the right. Then press either
the + or - keys to select the second or slave channel to be
mixed.
Operational Switch Settings
The programmable mixes can be tur
ned on and of
f in flight
using a variety of dif
ferent switches. The chart at right lists the
indication seen on the LCD display and its definitions.
Program Mix #3 Switch Settings
On
On at all times
F-NR
On at flight mode switch at nor
mal settings
F-S1
2
On at flight mode stunt #1 and stunt #2 positions
F-S2
On at flight mode stunt #2 position
T
o
select the desired switch setting, press the SEL key twice t
To Next Page
Loading...
