Section 3 Basic Operations 3-44
3.15 Password Input
Equipment settings are protected by a password. To open the dialog box of the protected setting
function, the password input is necessary.
Use the following procedure to enter a password.
1 Click on the [Menu] button at the bottom left corner of the screen.
The menu is displayed.
2 Click on the [Code Input] button on the Menu.
The password input dialog box appears.
3 Enter "0" (zero) and click on the [Enter] key.
4 Click on the [Menu] button at the bottom left corner of the screen again.
The [Service] button is displayed in the menu.
[Menu] button
To Next Page
Loading...
