JRC JAN-9202 - Setting up the Water Depth Display

5-5 Section 5 Setting Up Screen View
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
17
18
19
20
21
22
23
24
25
26
27
付録
Setting Item Description of Setting Setting Value
Water TEMP Select a unit of the water temperature from the
combo box.
°C, °F
Air Pressure Select a unit of the air pressure from the combo
box.
hPa, mbar
XTD/XTL for TCS
Info
Select a unit of the cross track limit from the
combo box.
NM, m
Wind Direction(True) Select a method for displaying the wind direction
(true) from the combo box.
16points, Degree
5.1.3 Setting up the Water Depth display
When [Depth Graph] is selected on the classification pain, the [Depth Graph] dialog is shown on the
Edit pain.
Note
This dialog may not be displayed depending on the equipment setting.
The following table shows the setting details:
Setting Item Description of Setting Setting Value
Depth Range(Docking) Select a water depth range for the docking
depth graph from the combo box.
AUTO, 10 m, 25 m, 50
m
Depth Range(Voyage) Select a water depth range for the route depth
graph from the combo box.
AUTO, 50 m, 100 m,
250 m