JRC JAN-9202 - Keyboard Operation Unit (Option)

2-3 Section 2 Name and Function of Each Unit
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
APP A
APP B
1
2.1.2 Keyboard operation unit (Option)
No. Name Function outline
1 [EBL] dial Not used.
2 [VRM] dial Not used.
3 [RAIN] dial Not used.
4 [SEA] dial Not used.
5 [GAIN] dial Not used.
6 [TX STBY] key Not used.
7 [AZ] key Not used.
8 [HOME] key Not used.
9 [DAY NIGHT] key Switches the display color on the screen over 5 levels according to the
brightness on the bridge.
10 [DISP OFF] key Not used.
11 [PI] key Not used.
12 [MOB] (Man Over
Board) key
- The [Marker] dialog box (which shows monitoring information for preventing
loss of sight of the position of the person who fell overboard) appears based on
the latitude and longitude information of the own ship's position.
- Holding down this key closes the [Marker] dialog box.
13 [PANEL] key Whenever this key is pressed, the brightness of the panel on the operation unit
is switched.
14 [USER1] key - Executes the function that is assigned to the key.
- Holding down this key displays the setting dialog box for assigning a function
to the [USER1] key.
15 [USER2] key - Executes the function that is assigned to the key.
- Holding down this key displays the setting dialog box for assigning a function
to the [USER2] key.
16 Keyboard The keyboard is used for the input of numeric values and characters at operation
of this equipment.
(1) (6) (3) (4) (5) (2) (7) (8) (9) (14)
(10)
(11)
(12)
(15)
(13)
(16)