EasyManua.ls Logo

JRC JAN-9202 - Description of each Block; Information about Azimuth Thruster of CPP (Controllable Pitch Propeller) Type; Navigation Information and the Legend of the; Navigation Information and the Legend of the Navigation

JRC JAN-9202
332 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 4 Conning Display 4-12
4.2.3 Description of each block
4.2.3.1 3D Navigation information and the legend of the
navigation
Item Display contents
Own ship Indicates the position of own ship.
Displayed under H-UP (own ship is positioned at the center of the screen).
Course Over
the Ground
Indicates the angle of the course over the ground.
The sensor that is selected by the "Course/speed over the ground information" of
the basic information display area is used as the source.
Route Displays the route based on the route information that is received from ECDIS.
Course to
Steer
Indicates the angle of the course to steer (CTS).
*The course to steer is displayed in autopilot mode. In other modes, the information
is not displayed.
4.2.3.2 Information about azimuth thruster of CPP (controllable
pitch propeller) type
Course Over the Ground
(yellow)
Azimuth thruster angle
[
res
p
onse value
]
Azimuth thruster
angle [order value]
Azimuth thruster pitch
angle [response value]
Azimuth thruster pitch
angle [order value]
Azimuth thruster
revolution [order
value]
Azimuth thruster angle
[response value]
Azimuth thruster pitch
angle [response value]
Azimuth thruster
revolution [response
value]
Route
Course To Steer (blue)
Own ship Legend

Table of Contents

Other manuals for JRC JAN-9202

Related product manuals