JRC JAN-9202 - MOB (man over Board)

3-27 Section 3 Basic Operations
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
APP A
APP B
1
3.9 MOB (Man Over Board)
When a person falls overboard, this monitoring function prevents loss of sight of the position of the
person overboard.
The MOB use procedure is as follows.
1 Click on the MOB button on the right toolbar.
The [Marker] dialog box appears.
See below for how to reference the [Marker] dialog box.
[1] [Position]
Displays the coordinates of the MOB.
[2] [Bearing]
Displays the bearing from own ship to the MOB position. The value changes as the ship moves.
[3] [Range]
Displays the range from the own ship to the MOB marker.
[4] NM/Km/sm switching button
Whenever this button is clicked on, the unit of [Range] is switched to NM, km or sm.
Memo
NM denotes nautical mile, sm denotes statute mile, and km denotes kilometer.
[5] [TTG]
Displays the time to reach the MOB marker from the ship speed.
[6] [Time]
Displays the time elapsed after clicking on the [MOB] button.
[1]
[2]
[3]
[5]
[6]
[4]