JRC JAN-9202 - Setting up the Display of Unit of Setting Value

Section 5 Setting Up Screen View 5-4
5.1.2 Setting up the display of unit of setting value
Note
Some items may not be displayed depending on the installation setting.
When you select [Unit] in the Classification pane, the [Unit] dialog is displayed in the Edit pane.
The descriptions of settings are shown in the table below.
Setting Item Description of Setting Setting Value
Depth (water depth) Select a unit of water depth from the combo box. m, ft, fm
Ship Speed Select a unit of the ship speed from the combo
box.
kn, m/s, km/h
Current Speed Select a unit of the current speed from the combo
box.
kn, m/s, km/h
Wind Speed Select a unit of the wind speed from the combo
box.
kn, m/s, km/h
Propeller Revolution Select a unit of the propeller's revolution per
minute from the combo box.
rpm, min-1
Propeller Pitch Angle Select a unit of the propeller's pitch angle from the
combo box.
Thruster Revolution Select the unit of thruster revolution from the
combo box.
rpm, min-1
Thruster Pitch Angle Select a unit of the thruster's pitch angle from the
combo box.
°, %, NOTCH
Air TEMP Select a unit of the air temperature from the
combo box.
°C, °F