Section 3 Basic Operations 3-22
3.7 Switching the Day/Night Mode
The screen display color can be switched to any of five levels according to the brightness within the
bridge.
Use the following procedure for switching.
1 Click on the Day/Night button on the right toolbar.
Adjustment buttons are displayed based on the brightness that is currently set.
2
Adjust the brightness by using the [Light] button and the
[Dark] button.
Whenever the
[Light] button is clicked on, the brightness increases by one level from the
current level.
When the [Dark] button is clicked on, the brightness decreases by one level from the
current level.
: Night
: Dusk
: Day 3
: Day 2
: Day 1
Example: Day2 is set.
To Next Page
Loading...
