12-5 Section 12 Specifications
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
22
23
25
26
27
付録
12.4 Central Control Unit
GENERAL SPECIFICATION NDC-1590: Central Control Unit
CPU Intel Core i5 2515E 2.5GHz
Main Memory 2GB (DDR3)
JRC ASIC Yes
Mechanical
Dimension Width 400 x Depth 240 x Height 125 (mm)
Mass 5.6kg
FAN 1
Environment
Operational Temperature -15°C to +55°C
Operational Humidity 40°C RH 93%
Vibration Sweep 2Hz to 13.2Hz at ± 1mm, 13.2Hz to 100Hz at 7m/s
2
and
for 2h on each resonance, otherwise 2h at 30Hz in all three axes
EMC IEC60945-Ed4.0
Ingress Protection Rating IP20
Interfaces
DVI-D 1
VGA 1 (Slave output with same resolution as DVI-D)
IEC61162-450 3 (IEEE802.3/IEEE802.3ab Compliance
(100BASE-TX/1000BASE-T))
IEC61162-1 2 input (GPS and LOG)
IEC61162-2 2 input (AIS and THD (Transmitting Heading Devices))
LAN 3 (up to 1GBase-T)
Dry Contact Output 2 (Power Fail and Watch Timer Reset )
Normally Close Power Fail (32V 0.8A MAX)
Normally Open Watch Timer Reset (32V 0.8A MAX)
Operation Unit 1 (5m max)
Ext Operation Unit 1 (up to 30m)
USB I/F 3 (1 for MNU, Others are general purpose)
RADAR I/F 1 input for scanner unit, 1 output for other equipment
Power Connecting with NBD-913
To Next Page
Loading...
