Section 9 Maintenance & Inspection 9-36
9.8 Updating Help Data
This section describes updating of help data of this product.
• Help data is classified to the data for RADAR, data for ECDIS, and data for Conning Display. To
display help information on each of the RADAR screen, ECDIS screen, and Conning Display
screen, install the help data for each display.
• When Help update starts, currently active tasks are terminated automatically. Complete the
necessary operations, such as saving the settings, before the start of update.
1 Set the CD/DVD or USB memory where update data is stored.
2 Click the [Menu] button at the bottom left corner of the screen.
A menu is displayed.
3 Click [Maintenance] - [Software Update].
The [Software Update] dialog is displayed.
4 Click the [Help Install] button.
To Next Page
Loading...
