4-39 Chapter 4 Conning Display
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
付録
4.2.3.37 Ship speed through water information
Item Display contents
Speed through the
water
Displays the speed through the water.
The reliabilities of the values are color coded into three colors:
・Normal character color: Normal sensor value
・Yellow: Deterioration of sensor value reliability
・Orange: Abnormal sensor value
The display unit can be switched in the View menu. For the details,
refer to "5.1.2 Setting up the display of unit of setting value".
Ship speed sensor
name combo box
Displays/changes a ship speed sensor name.
The following sensor sources can be selected.
When [Menu] is selected, the [Sensor Selection/Status] dialog is
displayed.
Log
*1
, Log1
*1 *2
, Log2
*1 *2
For the details of sensor source setting, refer to "9.1.5 Setting and
confirming sensor sources".
*1: When 1AX is installed for Log, Log cannot be selected from the sensor source.
*2: Only when there are two Logs
4.2.3.38 Course/speed over the ground information
Item Display contents
Course Over the Ground
Indicates the course over the ground.
The reliabilities of the values are color coded into three colors:
Normal character color: Normal sensor value
Yellow: Deterioration of sensor value reliability
Orange: Abnormal sensor value
Ship speed sensor name combo box
Speed through the water
Course Over the Ground
Speed Over the Ground
Course Over the Ground / Speed Over the Ground sensor name
combo box
To Next Page
Loading...
