JRC JAN-9202 - Page 190

Section 7 Setting Up the Operation Mode 7-6
Setting Item Description of Setting Setting Value
Message Notification Set the volume of the message notification
sound.
Off
Level1(Soft)
Level2
Level3 [Default]
Level4(Loud)
Alert Setting
Reminder
Set the volume of the sound notifying that the
alarm condition has not been set.
Off
Level1(Soft)
Level2
Level3 [Default]
Level4(Loud)
Navigation 1 Alarm Set the volume of the navigation alarm sound.
*2
Level4(Loud)
Navigation 2 Alarm
*1
Navigation 3 Alarm
*1
CPA/TCPA Alarm Set the volume of the CPA/TCPA alarm sound.
*2
Level4(Loud)
Warning Set the volume of the system alarm sound.
*2
Level4(Loud)
[Melody] tab
Navigation 1 Alarm
Set the melody of the Navigation 1 alarm.
Sound1
Sound2[Default]
Sound3
Sound4
Navigation 2 Alarm
*1
Set the melody of the Navigation 2 alarm.
Sound1
Sound2[Default]
Sound3
Sound4
Navigation 3 Alarm
*1
Set the melody of the Navigation 3 alarm.
Sound1
Sound2[Default]
Sound3
Sound4
CPA/TCPA Alarm
Set the melody of the CPA/TCPA alarm.
Sound1
Sound2[Default]
Sound3
Sound4
Warning
Set up the melody of Warning.
Sound1
Sound2[Default]
Sound3
Sound4
*1 Navigation 2 Alarm and Navigation 3 Alarm are not practically used.
*2 For these volumes, only Level 4 (Loud) is able to be selected.