3-33 Section 3 Basic Operations
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
APP A
APP B
[1] Input value display section
Displays the value that is input/edited through the software keyboard.
[2] Spin button
• When the right spin button is clicked on, the minimum unit value that can be set is added to the
value that is displayed. When the left spin button is clicked on, the minimum unit value that can be
set is subtracted from the value that is displayed.
Example of addition
• When the mouse button is held down on the right spin button, the value is added consecutively.
When the mouse button is held down on the left spin button, the value is subtracted consecutively.
• When the value set by the right spin button operation exceeds the maximum value, the minimum
value is set subsequently. When the value set by the left spin button operation becomes lower than
the minimum value, the maximum value is set subsequently.
[3] Numeric value slider
When the value adjustment button on the value slider is clicked on, the input value increases or
decreases.
[4] Operation guide display button
Displays an operation guide.
To close the operation guide, click on the operation guide display button again or click on a location
other than the operation guide.
[5] [CLR] key
Clears the input value that is currently selected.
To Next Page
Loading...
