JRC JFE-400 - Setting Log Book Print; Setting Log Output Length

4. Operation
4-21
Setting Log Book Print
◎This item selects automatic LOG book print mode.
When select this interval setting menu to 0.5min*, 1min, 2min, 5min, 10min, depth
data will automatically print with every selected interval. * 0.5min interval is
available only MEMORY LENGTH setting as 12 hours. If 24 hours is set, 0.5min
runs 1min interval. “OFF” stops automatic LOG book print mode.
NOTE: When GPS position data is connected to JFE-400, LAT/LON position data would print.
Setting Log Output Length
◎This item selects LOG output length on the HISTORY display mode with LOG print mode.
・ Touch and the setting will be displayed.
・ Detail item ：OFF/0.5min/1min/2min/5min/10min
・ Change the settings with ， .
・ After setting, touch
.
・ Touch
and the setting will be displayed.
・ Detail item ：10min/20min/30min/1hr/2hr
・ Change the settings with ， .
・ After setting, touch
.
FWD AFT
2021