JRC JFE-400 User Manual

6. Consider Installation
6-1
6. Consider Installation
• Do not install the JFE-400 where subject to the following conditions as such conditions may
cause failures and reduce the life of the equipment.
1. Where liable to be splashed with water.
2. Where ventilation is poor.
• Do not coat the part of the transducer that outputs the ultrasonic waves (the rubber part of
the tank on the ship's bottom) with the hull coating as this will deteriorate performance.

JRC JFE-400 Specifications

General

Brand	JRC
Model	JFE-400
Category	Marine Equipment
Language	English