JRC JHS-183 - 5.3.4.3 Regional Channel Settings

5-52
5.3.4.3 Regional Channel
Select 3.REGIONAL CHANNEL, Regional channel setting screen is displayed.
Set the channel management information in the specified area.
Up to 8 channel management settings can be registered.
Caution:
When setting the regional channel management, input the information correctly based on the
administration. Incorrect setting causes a failure of the communication with other vessels and coast
radio station.
Select the item with ▲ key or ▼ key and Press ENT key, the item can be set.
When the display is switched to SET UP menu, press CLR key.
In addition to the channel management information by this AIS
・AIS communication from a coast station to this ship
・AIS communication from a coast station to all ships
・DSC communication from a coast station
・Channel management by other equipment through the connection port.
REGIONAL CHANNEL
1.CH A:2087
2.CH B:2088
3.TX
/
RX MODE CH A,B
:TX
/
RX, TX
/
RX
4.TX POWER:HIGH
▼
5.ZONE SIZE:5NM
1
/
3
REGIONAL CHANNEL
▲
6.AREA:
°
.
′
(
NE
)
:
°
.
′
7.AREA:
°
.
′
(
SW
)
:
°
.
′
▼
2
/
3
REGIONAL CHANNEL
▲
8.SOURCE:
MMSI:
3
/
3