JUKI IT-100 - Pre-Use Setting Procedure

– 7 –
 2-3.Settingproceduretobetakenbeforerstuse
To use the production support function, the “production support function operation enable setting” and “date
and time setting” have to be carried out without exceptions. Be sure to enter data on the required items fol-
lowing the steps of procedure described below.
(1) Enabling the operation of the production support function.
<Information mode screen No.1>
3
1
2
1) Keep switch
1
on the information mode screen No. 1 held pressed for three seconds to display the sew-
ing management information screen No. 1 (Maintenance personnel level).
<Information mode screen No.2>
2) On the sewing management information screen No. 1, press sewing management information screen No.
2 changeover switch
2
to display the sewing management information screen No. 2.
<Sewing management information screen No.2>
3) Then press Production support function operation enable/disable changeover switch
3
to display the
production support function operation enable/disable setting screen.