– 31 –
2
1
1
＜
Continuous stitching mode
＞
In this mode, it is possible to make the sewing machine execute the subsequent step after the completion of
the current step.
1) In the programmed stitching pattern setting screen, select the continuous stitching mode using switches
1
and
2
.
2) As long as the continuous stitching mode is selected, you can make the sewing machine execute the
subsequent step set in the program after the completion of the current step by depressing the front part
of the pedal.
＜
To operate the operation panel in combination with the material edge sensor
＞
• When the operation panel is used in combination with the material edge sensor, the sewing process can
be completed not by the predetermined number of stitches but by the input signal of the material edge
sensor.
• Carefully read the Instruction Manual for the material edge sensor before using the sensor with the
operation panel.
3-4. Cycle sewing pattern
Reverse stitching pattern, overlapped stitching pattern, programmed stitching pattern 1 and programmed
stitching pattern 2 can be set and sewn as desired. (As many as eight different patterns can be set.)
1) Press switch
1
to display the cycle sewing edit pattern setting pop-up.
To Next Page
Loading...
Need help?
General
