■
Sewing common data screen No. 1 (maintenance personnel level)
7
1 2 3 4 5 6 8
2-1. Sewing common data screen
1) Press the respective switches to display the corresponding function screens.
1
Machine head selection .............With this key, the type of the sewing machine head is set. Refer to
"
@
.1-1. Machine head setting"
.
2
Optional input/output setting ......With this key, the optional input/output is set. Refer to
"
#
.4-13. Op-
tional input/output setting"
.
3
Ancillary device 1 setting
4
Ancillary device 2 setting
5
Thread trimmer setting
6
Simplied program editing
2) When you press
8
, the sewing common data screen No. 2 is displayed. When you press
7
, the screen
is returned to the information screen (maintenance personnel level). When you press , the screen is
returned to the one displayed before the information mode is entered.
When you execute formatting of the USB thumb drive, all pieces of data stored on it are erased.
Do not format the USB thumb drive in any case other than initialization of the medium.
No. Setting item Description
1
USB thumb drive format con-
rmation screen display switch
Refer to the Engineer's Manual for details.
2
Memory switch setting With this setting item, the contents of display related to the work management
function and those called up by operating the switches can be set or changed.
Refer to
"
$
. 2-2. Memory switch setting"
.
3
Network setting screen dis-
play switch
This switch is used to set or change the data related to the network function.
Refer to
"
$
.2-3. Network setting"
.
4
Information screen No. 1
changeover switch
This switch is used to display the information screen No. 1.
■
Information screen No. 2 (maintenance personnel level)
2 3 41