JUKI IT-100 User Manual

– 44 –
100
Number of stitches
sewn before thread
clamp works at
the beginning of
sewing
Sets the number of stitches to be sewn at the beginning of sewing
before the thread clamp solenoid (CN36-7) starts operating
0 : Thread clamp solenoid does not operate.
1-9 : The number of stitches to be sewn before the thread clamp
solenoid operates
0-9
(stitches)
N-GAST
103
Needle cooler
output OFF delay
time
Delay time from the stop of sewing machine to the output OFF is
specied using the needle cooler output function.
100 to to
2000 ms
T-DNCOFF
120
Main shaft
reference angle
compensation
Main shaft reference angle is compensated.
–60 to 60
A-ZDET
121
Up position
starting angle
compensation
Angle to detect UP position starting is compensated.
–15 to 15
A-UDET
122
DOWN position
starting angle
compensation
Angle to detect DOWN position starting is compensated.
–15 to 15
A-DDET
124
Setting of energy-
saving function
during standby
Setting to reduce the power consumption while the sewing machine
is in standby state
0: Energy-saving mode is ineffective
1: Energy-saving mode is effective
0
/
1
F-PSAVE
No. Item Description Setting range Indication of function setting
* Do not change the set values with asterisk (
*
) mark as they are functions for maintenance. If the standard set value set at the
time of delivery is changed, it is in danger of causing the machine to be broken or the performance to be deteriorated.
If it is necessary to change the set value, please purchase the Engineer’s Manual and follow the instructions.

JUKI IT-100 Specifications

General

Brand	JUKI
Model	IT-100
Category	Sewing Machine
Language	English