– 11 –
Button and display Description
L SEWING DATA CHANGE button Sewing data list screen is displayed.
→
Refer to
15. CHANGING SEWING DATA, p.37
.
M WITH/WITHOUT DOUBLE
STITCHING SETTING button
With/without double stitching which is set to the pattern data being
selected at present is displayed on this button and when the button is
pressed the with/without double stitching change screen is displayed.
N NUMBER OF TIMES OF BASTING
SETTING button
Number of times of basting which is set to the pattern data being
selected at present is displayed on this button and when the button is
pressed, the number of times of basting change screen is displayed.
O CLOTH CUTTING LENGTH
SETTING button
Cloth cutting length which is set to the pattern data being selected at
present is displayed on this button and when the button is pressed, the
cloth cutting length change screen is displayed.
P SEWING SHAPE SELECTION button Sewing shape which is set to the pattern data being selected at
present is displayed on this button and when the button is pressed, the
sewing shape change screen is displayed.
→
Refer to
8. PERFORMING SEWING SHAPE SELECTION, p.23
.
Q KNIFE GROOVE WIDTH, RIGHT
SETTING button
Knife groove width, right which is set to the pattern data being selected
at present is displayed on this button and when the button is pressed,
the knife groove width, right change screen is displayed.
R PRESSER TYPE SELECTION button Presser type being selected at present is displayed on this button
and when the button is pressed, the presser type change screen is
displayed.
→
Refer to
5. INPUTTING PRESSER TYPE, p.18
.
S CUSTOMIZE button Sewing data which are more frequently used can be laid out to four
buttons. When this button is pressed, the laid-out sewing data change
screen is displayed.
→
Refer to
19. REGISTERING SEWING DATA TO CUSTOMIZE
BUTTON, p.55
.
To Next Page
Loading...
