No. Item Setting range Edit unit Remarks
Tie stitching width at the end of sewing
This item sets tie stitching width at the
end of sewing.
0.1 to 1.5 0.1mm ---
Number of stitches of tie stitching at
the end of sewing
This item sets number of stitches of tie
stitching at the end of sewing.
0 to 8 1 stitch ---
Lengthwise compensation of tie
stitching at the end of sewing
This item sets start position of tie stitching
in lengthwise direction at the end of
sewing.
0.0 to 5.0 0.1mm ※2
Crosswise compensation of tie
stitching at the end of sewing
This item sets start position of tie stitching
in crosswise direction at the end of
sewing.
0.0 to 2.0 0.1mm ※2
Knife motion
This item sets "With/without motion" of normal cloth cutting
knife.
--- --- ---
: Normal knife
motion Off
: Normal knife
motion ON
Knife motion at 1st cycle of double stitching
This item sets "With/without motion" of cloth cutting knife at
1st cycle when double stitching is performed.
--- --- ※2,※3
: Normal knife
motion Off
: Normal knife
motion ON
Maximum speed limitation
This item sets max. number of revolutions
of the sewing machine. The maximum
value of data edit is equal to the number
of revolutions of K07 Maximum speed
limitation of the memory switch data.
→
Refer to
26-2 Memory switch data
list, p.79
.
400 to 4200 100rpm ---
To Next Page
Loading...
