– 70 –
Button and display Description
A CYCLE DATA NAME display Name inputted in cycle data during sewing is displayed.
B KNIFE CANCEL button Every time the button is pressed, dropping/non-dropping knife is
changed over alternately.
C PRESSER DOWN button Presser can be lowered and the knife down screen is displayed.
To raise the presser, press the presser up button displayed in the
presser down screen.
＊
When performing threading in this state, turn OFF the power before
performing.
D BOBBIN WINDER button
Bobbin thread can be wound.
→
Refer to
11. WINDING BOBBIN THREAD, p.29
.
E CYCLE DATA NO. display Cycle data No. during sewing is displayed.
F SEWING PRODUCT display Image of sewing product is displayed.
G STEP STITCHING button
When the button is pressed, the step stitching screen to check the
needle entry point and to perform re-sewing is displayed.
→
Refer to
10. PERFORMING RE-SEWING, p.27
.
H SEWUNG ORDER display Sewing order of inputted pattern data is displayed. Pattern data during
sewing is displayed in blue color.
I1 COUNTER VALUE CHANGE button
Existing counter value is displayed on this button. When the button is
pressed, the counter value change screen is displayed.
→
Refer to
12. USING COUNTER, p. 30
.
I2 COUNTER CHANGE OVER button
Display of sewing counter/No. of pcs. counter can be changed over.
→
Refer to
12. USING COUNTER, p. 30
.
J PATTERN NO. display Pattern No. during sewing is displayed.
K NEEDLE THREAD TENSION
CHANGE button
Needle thread tension inputted in the pattern data during sewing is
displayed.
When the button is pressed, the needle thread tension change screen
is displayed.
L NUMBER OF TOTAL STITCHES
display
Number of total stitches of the pattern data during sewing is displayed.
M OVEREDGING WIDTH, LEFT display Overedging width, left which is set to the pattern data during sewing is
displayed.
N SPEED variable resistor Number of rotation of the sewing machine can be changed.
O WITH/WITHOUT DOUBLE
STITCHING display
With/without double stitching which is set to the pattern data during
sewing is displayed.
P NUMBER OF TIMES OF DOUBLE
STITCHING display
Number of times of basting which is set to the pattern data during
sewing is displayed.
To Next Page
Loading...
