– 11 –
5. CONNECTING THE CORDS
WARNING :
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of the
sewing machine.
1) Pass the cords coming from the sewing machine
through hole
in the table and route them down
under the table.
2) Pass the cords
coming from the sewing ma-
chine between belt tension adjusting bolt
and
the motor taking care not to allow the cords to
come in contact with the belt.
3) Bundle cords coming from the sewing machine
with clip band
.
To Next Page
Loading...
Need help?
General
