– 17 –
10. LU-2220N-7 NEEDLE THREAD CLAMP FUNCTION
For the Needle thread clamp function, there are the functions below.
Function
Function No. 156
Needle thread
clamp function
0 : When the Needle thread clamp switch is turned ON, the function becomes valid.
1 : Needle thread clamp function becomes invalid.
2 : Regardless of turning ON/OFF of the Needle thread clamp switch, the function
becomes valid.
1) Refer to "1. Setting of the mounted head, 1) How to enter into the function setting mode”, and enter into
the function setting mode.
2) Press
switch
or switch
to call out function setting No.156.
3) Press
switch
or switch
and select the function.
4) Press
switch
or switch
and return to the function setting mode.
[How to make the setting]
To Next Page
Loading...
