3 Operation and visualization
46
3.2.7 Reports
Definition A report is a set of statistics covering a specific period of time, which contains
the minimum, maximum, average and, possibly, the integration value.
Types The recorder can run five different types of report:
-periodic report
(a report of a specific length of time, which is repeated periodically)
- external report/batches
(a report which is activated by a control signal, e. g. logic input, alarm, fault,
memory alarm, …).
- daily report
-monthly report
- annual report
Synchronization
time
All reports, apart from the external report, will be repeated according to a
configurable synchronization time (v page 89).
Current/
completed
report
For each type of report, the currently running and the latest concluded report
can be displayed.
v Chapter 2.6 “Integrator”
Channel name
- Call up next report type
- Switch between current
and last report
Select next/previous channel
Period during which the report was run
Specifies the report type
To Next Page
Loading...
