73
4 Configuration parameters
4.2.1 Parameterization
Parameter Value/selection Description
Contrast Parameterization
➔ Contrast
0—13 — 31 Display brightness
Speed indication Parameterization
➔ Speed indication
in mm/h, time/div
CF card (external)
(memory display)
Parameterization
➔ Memory display
➔ CF card (external)
Always,
If plugged in,
Never
Your can select here if and
how the available memory
of the external
CompactFlash memory
card is displayed in the
status line.
Int. memory: for
(memory display)
Parameterization
➔ Memory display
➔ Int. memory: for
Ser. read-out
Read-out via CF
v See “Memory display”
on page 57.
Switch-off event
(display off)
Parameterization
➔ Display off
➔ Switch-off event
Waiting time,
Control signal
The type of display switch-
off is selected here
Waiting time
(display off)
Parameterization
➔ Display off
➔ Waiting time
0 — 32767min Time after which the
display is switched off. Any
key stroke will re-activated
the display. The parameter
can only be entered if the
parameter Switch-off event
is set on “Waiting time”.
0 = display not off
To Next Page
Loading...
