Introduction
Thank you for purchasing the Jumper® JumperTX-2.4GHz System T16 Remote Control.
The system is versatile and can be used by beginners and professionals. Please read this
instruction manual carefully before use to ensure correct and safe use. Due to version
upgrades, there have been changes. The information contained in this manual is subject to
change without notice.
This T16 transmitter is suitable for all types of models of fixed wings, gliders, helicopters and
multi-rotors. The model type can be selected according to the body used, and various mixing
functions can be used.
Relevant precautions for use, export, etc.:
1. This product can be used in unmanned aerial vehicles. It does not apply to any application other
than
unmanned aerial vehicle control.
2. Precautions when exporting
A. This product is subject to regulations in to the country of manufacture. Users or companies
importing
This product must ensure the product meets regulatory requirements in their country.
B. This product may have restrictions on applications and use specific to y our region.
Please ensure you comply with local regulations when operating.
C. This product is intended only for user with RC Models.
Flight Safety：
We recommend that you fly to a dedicated model airspace, paying special attention to the rules of the
arena, as well as the location, wind direction and any obstacles on the field. Be very careful in areas
flying around wires, high-rise buildings or communication facilities, as nearby may there is radio
interference.
The contents of this manual are subject to change without notice. If there are any errors or
omissions in this manual, please contact us, we will correct them as soon as possible, and indicate
your corrections.
To Next Page
Loading...
Need help?
General
