Jumper T16 User Manual

3
1. Overview
JumperTX is a firmware that runs on the T16. Its main purpose is to support the receiver of
more protocols, thus developing all the potential of the remote control. The core of the
JumperTX firmware is based on the modified Er9x firmware system of the Turnigy/Flysky9xTM
remote.
JumperTX also has USB file management, making it easier to manage the remote via PC
software.
The display of the main interface of JumperTX can be modified according to your needs. You
can display any input, switch, channel data and timer at random on the main interface, and you
can set each model separately.
JumperTX can connect to the flight simulator via a DSC line (PPM) or USB cable (USBHID).
JumperTX also supports coaching and FPV settings.
JumperTX has been internationalized and has been translated into English (EN), Czech (CZ),
Finnish (FI), Dutch (NL), Spanish (ES), French (FR), German (DE), Polish (PL) ), Italian (IT),
Portugal (PT), Sweden (SE).
1.1. Disclaimer
JumperTX is an experimental firmware. No warranty or implied warranty is given as to the
quality and reliability of this firmware. The RC model can cause serious injury or even death if
not handled properly. If you decide to use JumperTX firmware, you will be solely responsible for
your model. Any injury or damage caused by the use of JumperTX firmware,
The author of JumperTX is not responsible for it. Please use it with caution.
1.2. Legal status and copyright
This project is free software: you may redistribute and/or modify it in compliance with the
GNU General Public License, the V3 version of the agreement, or (optionally) the updated
version of the agreement issued by the Free Software Foundation. You should receive a copy of
the GNU General Public License Agreement for the JumperTX project. If not, see
www.gnu.org/licenses.
The JumperTX firmware has been released and is expected to benefit the public, but it does not
have any warranty; it does not even include an implied commercial license or applicability for a
particular purpose. For more details, see the GNU General Public License.
JumperTX source files, etc. can be found at https://github.com/jumperXYZ.

Jumper T16 Specifications

General

Channels	16
Operating System	OpenTX
USB Port	Yes
External Module Support	Yes
SD Card Slot	Yes
Speaker	Yes
Vibration Alert	Yes
Backlight	Yes
Gimbals	Hall sensor
Module Bay	Yes
Transmitter Frequency	2.4GHz
Antenna Gain	2dBi
Battery Capacity	3000mAh
Operating Current	200mA
Charging Port	Yes
Internal Module	JP4-in-1 Multi-protocol Module